Tenkai Home Lift
Tenkai V300
Battery driven. Mains power only charges it.
V300 is the SJEC V300 under the Tenkai badge, built around SJEC's battery drive, Cube. The battery powers the lift and the mains only charges it, so the lift keeps running through a blackout rather than stopping and waiting for one. Charging off-peak and running on the battery at peak is what SJEC's own material presents as the running-cost case.
- Car type
- Cabin or platform
- Rated load
- 320 kg / 400 kg
- Minimum pit
- 300 mm
- Shaft width
- 850–1,400 mm
- Door opening
- 600 × 2,000 mm
- Counterweight
- Side or rear
- Machine
- Permanent magnet synchronous gearless, ~1.1 kW
- Power supply
- Single phase 220 V, or three phase
- Travel unplugged
- About 250 floors at full load
Standard configuration
What comes as standard.
- Battery drive — mains supply charges the battery only
- Permanent magnet synchronous gearless traction machine, about 1.1 kW
- A3-size controller, 325 × 425 × 50 mm — no contactor, cooling fan or brake resistor
- Automatic rescue device built in
- Battery management system with health monitoring
- Automatic re-levelling at low power, and automatic rescue on battery failure
- 10.1-inch LCD car control panel
- Solar-panel compatible (panels supplied separately)
In detail
Up close.
Studio renders, made from photographs of the real lift.
The swing door, the champagne frame and the car panel.
The rest of the range
Three other models.
Which model suits your house?
Shaft, pit and overhead decide it more often than anything else. Send us the space and our engineers will tell you what fits.